Advanced EX for HYUNDAI. Hyundai advanced ex for


Advanced EX for HYUNDAI 1.10 Загрузить APK для Android

Описание Advanced EX for HYUNDAI

Monitor specific HYUNDAI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.

Advanced EX is a plugin for Torque Pro, extending the PID/Sensor list with more than 10 specific parameters from HYUNDAI vehicles, including:

* AT Turbine and Output Speed (*)

* AT Oil Temperature (*)

* AT Damper Clutch Lockup (*)

* AT HIVEC Mode (*)

* AT Current Gear (*)

* CVVT Oil Temperature

* Fuel Injector Pulse Width / Duty Cycle

* Knock Retard (*)

* Wastegate Duty Cycle (*)

* Turbo Boost Pressure (*)

Sensors marked with (*) are not available on all cars, as it depends on special engine/parts like Turbo and/or Automatic Transmission.

For cars with automatic transmission, Lockup is really cool to monitor during a long road trip or even while driving in the city. As described on HYUNDAI Service Manuals, the Damper Clutch Lockup shows in real-time the actual Torque Converter lockup percentage, and as it approaches 100% the slip should be near zero.

*PLEASE NOTE* that other HYUNDAI models/engines may be supported, but the plugin was tested only on the following models/engines:

* Accent 1.4/1.6 MPI

* Accent/Solaris 1.4/1.6 GDI

* Accent/Solaris 1.6 CRDI

* Elantra/i30 2.0

* Genesis Coupe 2.0 MPI/GDI

* Genesis Coupe 3.8 V6

* Getz 1.5 CRDI

* Getz 1.6/1.4/1.3 MPI

* i30 1.6 GDI

* i30 1.6 CRDI

* i40 2.0 MPI

* i40 1.6 GDI

* i40 1.7 CRDI

* SantaFe 3.3 V6

* SantaFe 2.0 CRDI

* SantaFe 2.4 MPI/GDI

* SantaFe 2.7 V6

* SantaFe 2.0/2.2 CRDI

* SantaFe 3.3 V6

* Sonata 2.0/2.4 MPI/GDI

* Sonata/i45 2.0/2.4 MPI/GDI

* Sonata 2.0 T-GDI

* Tiburon 2.0 MPI

* Tiburon 2.7 V6

* Terracan 2.9 CRDI

* Tucson 2.0 CRDI

* Tucson 2.0 MPI

* Tucson 2.7 V6

* Tucson/ix35 2.0/2.4 MPI/GDI

* Tucson/ix35 2.0 CRDI

* Veloster 1.6 MPI/GDI

* Veloster 1.6 T-GDI

* Veracruz/ix55 3.8 V6

* Veracruz/ix55 3.0 CRDI

For more information about HYUNDAI engines, visit http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines

Advanced EX requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.

Plugin Installation

-------------------------

1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.

2) Launch Torque Pro and click on the "Advanced EX" icon

3) Select the appropriate engine type and return to Torque Pro main screen

4) Go to Torque Pro "Settings"

5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".

6) Scroll down to "Manage extra PIDs/Sensors"

7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.

8) From the menu, choose "Add predefined set"

9) If your license is validated on Google Play you should see an entry for your engine. You may see predefined sets for other engine types, so make sure you pick the right one. If you don't see anything, probably you have an installation problem or validation error on Google Play. In this case, go back and repeat the installation procedure.

10) After clicking on the entry from the previous step, you should see several entries added to the Extra PIDs/Sensors list.

Note: Some sensors will be calculated real-time based on others. Make sure that you keep all sensors to avoid calculation errors.

Adding Displays

------------------------

1) After adding the additional sensors, go to the Realtime Information/Dashboard.

2) Press the menu key and then click on "Add Display"

3) Select the appropriate display type

4) Select the appropriate sensor from the list. Sensors provided by Advanced EX begins with "[HADV]" and should be listed right after the time sensors in the top of the list.

More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.

</br></br>

</br></br>

</br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>

</br></br></br></br></br></br></br></br></br>

advanced-ex-for-hyundai.ru.aptoide.com

Advanced EX for HYUNDAI APK 1.10 Download

Edit Review:

Advanced EX for HYUNDAI is a Tools app developed by Dare Apps. The latest version of Advanced EX for HYUNDAI is 1.10. It was released on . You can download Advanced EX for HYUNDAI 1.10 directly on Allfreeapk.com. Over 150 users rating a average 2.7 of 5 about Advanced EX for HYUNDAI. More than 10000 is playing Advanced EX for HYUNDAI right now. Coming to join them and download Advanced EX for HYUNDAI directly!

What's New

NOTE: Read the description carefully before purchasing. All bad ratings are related to people purchasing the app without checking the requirements and compatibility. Version 1.10 ----------------- * Icon and name changes to comply with Google publishing guidelines.

Details

Monitor specific HYUNDAI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.

Advanced EX is a plugin for Torque Pro, extending the PID/Sensor list with more than 10 specific parameters from HYUNDAI vehicles, including:

* AT Turbine and Output Speed (*)* AT Oil Temperature (*)* AT Damper Clutch Lockup (*)* AT HIVEC Mode (*)* AT Current Gear (*)* CVVT Oil Temperature* Fuel Injector Pulse Width / Duty Cycle* Knock Retard (*)* Wastegate Duty Cycle (*)* Turbo Boost Pressure (*)

Sensors marked with (*) are not available on all cars, as it depends on special engine/parts like Turbo and/or Automatic Transmission.

For cars with automatic transmission, Lockup is really cool to monitor during a long road trip or even while driving in the city. As described on HYUNDAI Service Manuals, the Damper Clutch Lockup shows in real-time the actual Torque Converter lockup percentage, and as it approaches 100% the slip should be near zero.

*PLEASE NOTE* that other HYUNDAI models/engines may be supported, but the plugin was tested only on the following models/engines:

* Accent 1.4/1.6 MPI* Accent/Solaris 1.4/1.6 GDI* Accent/Solaris 1.6 CRDI* Elantra/i30 2.0* Genesis Coupe 2.0 MPI/GDI* Genesis Coupe 3.8 V6* Getz 1.5 CRDI* Getz 1.6/1.4/1.3 MPI* i30 1.6 GDI* i30 1.6 CRDI* i40 2.0 MPI* i40 1.6 GDI* i40 1.7 CRDI* SantaFe 3.3 V6* SantaFe 2.0 CRDI* SantaFe 2.4 MPI/GDI* SantaFe 2.7 V6* SantaFe 2.0/2.2 CRDI* SantaFe 3.3 V6* Sonata 2.0/2.4 MPI/GDI* Sonata/i45 2.0/2.4 MPI/GDI* Sonata 2.0 T-GDI* Tiburon 2.0 MPI* Tiburon 2.7 V6* Terracan 2.9 CRDI* Tucson 2.0 CRDI* Tucson 2.0 MPI* Tucson 2.7 V6* Tucson/ix35 2.0/2.4 MPI/GDI* Tucson/ix35 2.0 CRDI* Veloster 1.6 MPI/GDI* Veloster 1.6 T-GDI* Veracruz/ix55 3.8 V6* Veracruz/ix55 3.0 CRDI

For more information about HYUNDAI engines, visit http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines

Advanced EX requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.

Plugin Installation-------------------------

1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.

2) Launch Torque Pro and click on the "Advanced EX" icon

3) Select the appropriate engine type and return to Torque Pro main screen

4) Go to Torque Pro "Settings"

5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".

6) Scroll down to "Manage extra PIDs/Sensors"

7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.

8) From the menu, choose "Add predefined set"

9) If your license is validated on Google Play you should see an entry for your engine. You may see predefined sets for other engine types, so make sure you pick the right one. If you don't see anything, probably you have an installation problem or validation error on Google Play. In this case, go back and repeat the installation procedure.

10) After clicking on the entry from the previous step, you should see several entries added to the Extra PIDs/Sensors list.

Note: Some sensors will be calculated real-time based on others. Make sure that you keep all sensors to avoid calculation errors.

Adding Displays------------------------

1) After adding the additional sensors, go to the Realtime Information/Dashboard.

2) Press the menu key and then click on "Add Display"

3) Select the appropriate display type

4) Select the appropriate sensor from the list. Sensors provided by Advanced EX begins with "[HADV]" and should be listed right after the time sensors in the top of the list.

More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.

www.allfreeapk.com

Advanced EX for HYUNDAI 1.10 descarregar o APK para Android

Descrição de Advanced EX for HYUNDAI

Monitor specific HYUNDAI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.

Advanced EX is a plugin for Torque Pro, extending the PID/Sensor list with more than 10 specific parameters from HYUNDAI vehicles, including:

* AT Turbine and Output Speed (*)

* AT Oil Temperature (*)

* AT Damper Clutch Lockup (*)

* AT HIVEC Mode (*)

* AT Current Gear (*)

* CVVT Oil Temperature

* Fuel Injector Pulse Width / Duty Cycle

* Knock Retard (*)

* Wastegate Duty Cycle (*)

* Turbo Boost Pressure (*)

Sensors marked with (*) are not available on all cars, as it depends on special engine/parts like Turbo and/or Automatic Transmission.

For cars with automatic transmission, Lockup is really cool to monitor during a long road trip or even while driving in the city. As described on HYUNDAI Service Manuals, the Damper Clutch Lockup shows in real-time the actual Torque Converter lockup percentage, and as it approaches 100% the slip should be near zero.

*PLEASE NOTE* that other HYUNDAI models/engines may be supported, but the plugin was tested only on the following models/engines:

* Accent 1.4/1.6 MPI

* Accent/Solaris 1.4/1.6 GDI

* Accent/Solaris 1.6 CRDI

* Elantra/i30 2.0

* Genesis Coupe 2.0 MPI/GDI

* Genesis Coupe 3.8 V6

* Getz 1.5 CRDI

* Getz 1.6/1.4/1.3 MPI

* i30 1.6 GDI

* i30 1.6 CRDI

* i40 2.0 MPI

* i40 1.6 GDI

* i40 1.7 CRDI

* SantaFe 3.3 V6

* SantaFe 2.0 CRDI

* SantaFe 2.4 MPI/GDI

* SantaFe 2.7 V6

* SantaFe 2.0/2.2 CRDI

* SantaFe 3.3 V6

* Sonata 2.0/2.4 MPI/GDI

* Sonata/i45 2.0/2.4 MPI/GDI

* Sonata 2.0 T-GDI

* Tiburon 2.0 MPI

* Tiburon 2.7 V6

* Terracan 2.9 CRDI

* Tucson 2.0 CRDI

* Tucson 2.0 MPI

* Tucson 2.7 V6

* Tucson/ix35 2.0/2.4 MPI/GDI

* Tucson/ix35 2.0 CRDI

* Veloster 1.6 MPI/GDI

* Veloster 1.6 T-GDI

* Veracruz/ix55 3.8 V6

* Veracruz/ix55 3.0 CRDI

For more information about HYUNDAI engines, visit http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines

Advanced EX requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.

Plugin Installation

-------------------------

1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.

2) Launch Torque Pro and click on the "Advanced EX" icon

3) Select the appropriate engine type and return to Torque Pro main screen

4) Go to Torque Pro "Settings"

5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".

6) Scroll down to "Manage extra PIDs/Sensors"

7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.

8) From the menu, choose "Add predefined set"

9) If your license is validated on Google Play you should see an entry for your engine. You may see predefined sets for other engine types, so make sure you pick the right one. If you don't see anything, probably you have an installation problem or validation error on Google Play. In this case, go back and repeat the installation procedure.

10) After clicking on the entry from the previous step, you should see several entries added to the Extra PIDs/Sensors list.

Note: Some sensors will be calculated real-time based on others. Make sure that you keep all sensors to avoid calculation errors.

Adding Displays

------------------------

1) After adding the additional sensors, go to the Realtime Information/Dashboard.

2) Press the menu key and then click on "Add Display"

3) Select the appropriate display type

4) Select the appropriate sensor from the list. Sensors provided by Advanced EX begins with "[HADV]" and should be listed right after the time sensors in the top of the list.

More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.

advanced-ex-for-hyundai.pt.aptoide.com

Advanced EX for HYUNDAI APK 1.10 için Android

Pro torkla için bu eklentiyi ekleyerek motor ve otomatik şanzıman gelişmiş sensör verileri dahil olmak üzere gerçek-zamanlı olarak özel HYUNDAI parametreleri izleyin.

Gelişmiş EX Tork için bir eklenti Pro, araç HYUNDAI fazla 10 belirli parametreler ile PID / Algılayıcı listesi dahil uzanan:

* Türbin ve Çıkış Hızı AT (*)* Yağ Sıcaklık AT (*)* Amortisör Debriyaj deposundan AT (*)* HIVEC Modu AT (*)* Akım Dişli AT (*)* CVVT Yağ Sıcaklık* Yakıt Enjektör Darbe Genişliği / Görev Döngüsü* (*) Geciktirme Knock* Wastegate Duty Cycle (*)* Turbo Boost Basıncı (*)

O Turbo ve / veya Otomatik Şanzıman gibi özel motor / parçaları bağlıdır olarak (*) ile işaretlenmiş Sensörler, tüm araçlarda mevcut değildir.

Otomatik vitesli araçlar için, tıkanabilir uzun bir yolculuğa sırasında izlemek gerçekten iyidir ya da şehir içinde sürüş bile. HYUNDAI Servis Kılavuzları açıklandığı gibi, Amortisör Debriyaj tıkanabilir gerçek zamanlı gerçek Tork konvertör yüzde olarak gösterir ve bunun% 100 yaklaşırken kayma sıfıra yakın olmalıdır.

* Diğer HYUNDAI modelleri / motorları desteklenmektedir olabilir, ancak eklenti sadece aşağıdaki modelleri / motorlarında test olduğunu * LÜTFEN DİKKAT:

* Accent 1.4/1.6 MPİ* Accent / Solaris 1.4/1.6 GDI* Accent / Solaris 1.6 CRDI* Elantra/i30 2.0* Genesis Coupe 2.0 MPI / GDI* Genesis Coupe 3.8 V6* Getz 1.5 CRDI* Getz 1.6/1.4/1.3 MPİ* I30 1.6 GDI* I30 1.6 CRDI* I40 2.0 MPI* I40 1.6 GDI* I40 1.7 CRDI* SantaFe 3.3 V6* SantaFe 2.0 CRDI* SantaFe 2.4 MPI / GDI* SantaFe 2.7 V6* SantaFe 2.0/2.2 CRDI* SantaFe 3.3 V6* Sonata 2.0/2.4 MPI / GDI* Sonata/i45 2.0/2.4 MPI / GDI* Sonata 2.0 T-GDI* Tiburon 2.0 MPI* Tiburon 2.7 V6* Terracan 2.9 CRDI* Tucson 2.0 CRDI* Tucson 2.0 MPI* Tucson 2.7 V6* Tucson/ix35 2.0/2.4 MPI / GDI* Tucson/ix35 2.0 CRDI* Veloster 1.6 MPI / GDI* Veloster 1.6 T-GDI* Veracruz/ix55 3.8 V6* Veracruz/ix55 3.0 CRDI

HYUNDAI motorlar hakkında daha fazla bilgi için, http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines ziyaret

Gelişmiş EX Pro çalışması için yüklü Tork son sürümünü gerektirmektedir. Bu * NOT * bağımsız bir uygulamadır ve irade * NOT * çalışma Tork olmadan Pro.

Eklentisi Kurulum-------------------------

1) Google Play eklenti satın aldıktan sonra, Android cihazınızda yüklü uygulamaların listesini listelenen eklenti görmek emin olun.

2) Başlat Tork Pro ve "Gelişmiş EX" ikonuna tıklayın

3) Uygun motor tipini seçin ve Tork Pro ana ekrana dönmek

4) Pro "Ayarlar" torkla git

5) "Ayarlar"> "Eklentiler"> "Yüklü Eklentiler" tıklayarak Pro Tork Ayrıca listelenen eklenti görebilirsiniz emin olun.

6) "ekstra PIDlerini / Sensörler Yönet" seçeneğine gelin

Eğer geçmişte herhangi bir ön tanımlı veya özel PID'lere eklediğiniz sürece 7) Genellikle bu ekran, tüm girdileri görüntüler olmaz.

8) menüsünden seçin "önceden tanımlanmış bir dizi Ekle"

Lisans Google Play geçerliliği ise 9) sizin motor için bir giriş göreceksiniz. Diğer motor tipleri için önceden tanımlı ayarlar görmek, bu yüzden doğru bir seçim emin olabilir. Eğer bir şey görmüyorsanız, muhtemelen Google Play'de yükleme sorunu ya da doğrulama hatası var. Bu durumda, geri dönün ve kurulum prosedürünü tekrarlayın.

10) önceki adımdaki girişine tıkladıktan sonra, Ekstra PIDlerini / Sensörler listesine eklenen çeşitli girdileri görmelisiniz.

Not: Bazı sensörler diğerleri dayalı gerçek zamanlı hesaplanacaktır. Eğer hesaplama hataları önlemek için tüm sensörleri tutmak emin olun.

Ekranlar ekleme------------------------

1) ilave sensörler ekledikten sonra, Gerçek Zamanlı Bilgi / Dashboard gidin.

2) Menü tuşuna basın ve sonra "Display Ekle" butonuna tıklayın

3) uygun görüntü türünü seçin

4) Listeden uygun sensörü seçin. Gelişmiş EX tarafından sağlanan Sensörler "[HADV]" ve sağ listenin üst zaman sensörler sonra listelenmiş olmalıdır başlar.

Diğer özellikler / parametreleri ileri sürümlerde eklenecektir. Eğer yorum ve / veya önerileriniz varsa bana bildirin lütfen.

www.apkgplay.com

Advanced EX for HYUNDAI 1.10 Android အတြက္ Aptoide APK အား ေဒါင္းလုပ္ ျပဳလုပ္ပါ

Advanced EX for HYUNDAI ၏ ေဖာ္ျပခ်က္

Monitor specific HYUNDAI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.

Advanced EX is a plugin for Torque Pro, extending the PID/Sensor list with more than 10 specific parameters from HYUNDAI vehicles, including:

* AT Turbine and Output Speed (*)

* AT Oil Temperature (*)

* AT Damper Clutch Lockup (*)

* AT HIVEC Mode (*)

* AT Current Gear (*)

* CVVT Oil Temperature

* Fuel Injector Pulse Width / Duty Cycle

* Knock Retard (*)

* Wastegate Duty Cycle (*)

* Turbo Boost Pressure (*)

Sensors marked with (*) are not available on all cars, as it depends on special engine/parts like Turbo and/or Automatic Transmission.

For cars with automatic transmission, Lockup is really cool to monitor during a long road trip or even while driving in the city. As described on HYUNDAI Service Manuals, the Damper Clutch Lockup shows in real-time the actual Torque Converter lockup percentage, and as it approaches 100% the slip should be near zero.

*PLEASE NOTE* that other HYUNDAI models/engines may be supported, but the plugin was tested only on the following models/engines:

* Accent 1.4/1.6 MPI

* Accent/Solaris 1.4/1.6 GDI

* Accent/Solaris 1.6 CRDI

* Elantra/i30 2.0

* Genesis Coupe 2.0 MPI/GDI

* Genesis Coupe 3.8 V6

* Getz 1.5 CRDI

* Getz 1.6/1.4/1.3 MPI

* i30 1.6 GDI

* i30 1.6 CRDI

* i40 2.0 MPI

* i40 1.6 GDI

* i40 1.7 CRDI

* SantaFe 3.3 V6

* SantaFe 2.0 CRDI

* SantaFe 2.4 MPI/GDI

* SantaFe 2.7 V6

* SantaFe 2.0/2.2 CRDI

* SantaFe 3.3 V6

* Sonata 2.0/2.4 MPI/GDI

* Sonata/i45 2.0/2.4 MPI/GDI

* Sonata 2.0 T-GDI

* Tiburon 2.0 MPI

* Tiburon 2.7 V6

* Terracan 2.9 CRDI

* Tucson 2.0 CRDI

* Tucson 2.0 MPI

* Tucson 2.7 V6

* Tucson/ix35 2.0/2.4 MPI/GDI

* Tucson/ix35 2.0 CRDI

* Veloster 1.6 MPI/GDI

* Veloster 1.6 T-GDI

* Veracruz/ix55 3.8 V6

* Veracruz/ix55 3.0 CRDI

For more information about HYUNDAI engines, visit http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines

Advanced EX requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.

Plugin Installation

-------------------------

1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.

2) Launch Torque Pro and click on the "Advanced EX" icon

3) Select the appropriate engine type and return to Torque Pro main screen

4) Go to Torque Pro "Settings"

5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".

6) Scroll down to "Manage extra PIDs/Sensors"

7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.

8) From the menu, choose "Add predefined set"

9) If your license is validated on Google Play you should see an entry for your engine. You may see predefined sets for other engine types, so make sure you pick the right one. If you don't see anything, probably you have an installation problem or validation error on Google Play. In this case, go back and repeat the installation procedure.

10) After clicking on the entry from the previous step, you should see several entries added to the Extra PIDs/Sensors list.

Note: Some sensors will be calculated real-time based on others. Make sure that you keep all sensors to avoid calculation errors.

Adding Displays

------------------------

1) After adding the additional sensors, go to the Realtime Information/Dashboard.

2) Press the menu key and then click on "Add Display"

3) Select the appropriate display type

4) Select the appropriate sensor from the list. Sensors provided by Advanced EX begins with "[HADV]" and should be listed right after the time sensors in the top of the list.

More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.

</br></br>

</br></br>

</br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>

</br></br></br></br></br></br></br></br></br>

advanced-ex-for-hyundai.mm.aptoide.com

Advanced EX for HYUNDAI1.10 tải APK dành cho Android

Mô tả của Advanced EX for HYUNDAI

Monitor specific HYUNDAI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.

Advanced EX is a plugin for Torque Pro, extending the PID/Sensor list with more than 10 specific parameters from HYUNDAI vehicles, including:

* AT Turbine and Output Speed (*)

* AT Oil Temperature (*)

* AT Damper Clutch Lockup (*)

* AT HIVEC Mode (*)

* AT Current Gear (*)

* CVVT Oil Temperature

* Fuel Injector Pulse Width / Duty Cycle

* Knock Retard (*)

* Wastegate Duty Cycle (*)

* Turbo Boost Pressure (*)

Sensors marked with (*) are not available on all cars, as it depends on special engine/parts like Turbo and/or Automatic Transmission.

For cars with automatic transmission, Lockup is really cool to monitor during a long road trip or even while driving in the city. As described on HYUNDAI Service Manuals, the Damper Clutch Lockup shows in real-time the actual Torque Converter lockup percentage, and as it approaches 100% the slip should be near zero.

*PLEASE NOTE* that other HYUNDAI models/engines may be supported, but the plugin was tested only on the following models/engines:

* Accent 1.4/1.6 MPI

* Accent/Solaris 1.4/1.6 GDI

* Accent/Solaris 1.6 CRDI

* Elantra/i30 2.0

* Genesis Coupe 2.0 MPI/GDI

* Genesis Coupe 3.8 V6

* Getz 1.5 CRDI

* Getz 1.6/1.4/1.3 MPI

* i30 1.6 GDI

* i30 1.6 CRDI

* i40 2.0 MPI

* i40 1.6 GDI

* i40 1.7 CRDI

* SantaFe 3.3 V6

* SantaFe 2.0 CRDI

* SantaFe 2.4 MPI/GDI

* SantaFe 2.7 V6

* SantaFe 2.0/2.2 CRDI

* SantaFe 3.3 V6

* Sonata 2.0/2.4 MPI/GDI

* Sonata/i45 2.0/2.4 MPI/GDI

* Sonata 2.0 T-GDI

* Tiburon 2.0 MPI

* Tiburon 2.7 V6

* Terracan 2.9 CRDI

* Tucson 2.0 CRDI

* Tucson 2.0 MPI

* Tucson 2.7 V6

* Tucson/ix35 2.0/2.4 MPI/GDI

* Tucson/ix35 2.0 CRDI

* Veloster 1.6 MPI/GDI

* Veloster 1.6 T-GDI

* Veracruz/ix55 3.8 V6

* Veracruz/ix55 3.0 CRDI

For more information about HYUNDAI engines, visit http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines

Advanced EX requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.

Plugin Installation

-------------------------

1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.

2) Launch Torque Pro and click on the "Advanced EX" icon

3) Select the appropriate engine type and return to Torque Pro main screen

4) Go to Torque Pro "Settings"

5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".

6) Scroll down to "Manage extra PIDs/Sensors"

7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.

8) From the menu, choose "Add predefined set"

9) If your license is validated on Google Play you should see an entry for your engine. You may see predefined sets for other engine types, so make sure you pick the right one. If you don't see anything, probably you have an installation problem or validation error on Google Play. In this case, go back and repeat the installation procedure.

10) After clicking on the entry from the previous step, you should see several entries added to the Extra PIDs/Sensors list.

Note: Some sensors will be calculated real-time based on others. Make sure that you keep all sensors to avoid calculation errors.

Adding Displays

------------------------

1) After adding the additional sensors, go to the Realtime Information/Dashboard.

2) Press the menu key and then click on "Add Display"

3) Select the appropriate display type

4) Select the appropriate sensor from the list. Sensors provided by Advanced EX begins with "[HADV]" and should be listed right after the time sensors in the top of the list.

More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.

</br></br>

</br></br>

</br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>

</br></br></br></br></br></br></br></br></br>

advanced-ex-for-hyundai.vn.aptoide.com

Advanced EX for HYUNDAI 1.10 Muat turun APK untuk Android

Perihalan bagi Advanced EX for HYUNDAI

Monitor specific HYUNDAI parameters in real-time, including engine and automatic transmission advanced sensor data by adding this plugin to Torque Pro.

Advanced EX is a plugin for Torque Pro, extending the PID/Sensor list with more than 10 specific parameters from HYUNDAI vehicles, including:

* AT Turbine and Output Speed (*)

* AT Oil Temperature (*)

* AT Damper Clutch Lockup (*)

* AT HIVEC Mode (*)

* AT Current Gear (*)

* CVVT Oil Temperature

* Fuel Injector Pulse Width / Duty Cycle

* Knock Retard (*)

* Wastegate Duty Cycle (*)

* Turbo Boost Pressure (*)

Sensors marked with (*) are not available on all cars, as it depends on special engine/parts like Turbo and/or Automatic Transmission.

For cars with automatic transmission, Lockup is really cool to monitor during a long road trip or even while driving in the city. As described on HYUNDAI Service Manuals, the Damper Clutch Lockup shows in real-time the actual Torque Converter lockup percentage, and as it approaches 100% the slip should be near zero.

*PLEASE NOTE* that other HYUNDAI models/engines may be supported, but the plugin was tested only on the following models/engines:

* Accent 1.4/1.6 MPI

* Accent/Solaris 1.4/1.6 GDI

* Accent/Solaris 1.6 CRDI

* Elantra/i30 2.0

* Genesis Coupe 2.0 MPI/GDI

* Genesis Coupe 3.8 V6

* Getz 1.5 CRDI

* Getz 1.6/1.4/1.3 MPI

* i30 1.6 GDI

* i30 1.6 CRDI

* i40 2.0 MPI

* i40 1.6 GDI

* i40 1.7 CRDI

* SantaFe 3.3 V6

* SantaFe 2.0 CRDI

* SantaFe 2.4 MPI/GDI

* SantaFe 2.7 V6

* SantaFe 2.0/2.2 CRDI

* SantaFe 3.3 V6

* Sonata 2.0/2.4 MPI/GDI

* Sonata/i45 2.0/2.4 MPI/GDI

* Sonata 2.0 T-GDI

* Tiburon 2.0 MPI

* Tiburon 2.7 V6

* Terracan 2.9 CRDI

* Tucson 2.0 CRDI

* Tucson 2.0 MPI

* Tucson 2.7 V6

* Tucson/ix35 2.0/2.4 MPI/GDI

* Tucson/ix35 2.0 CRDI

* Veloster 1.6 MPI/GDI

* Veloster 1.6 T-GDI

* Veracruz/ix55 3.8 V6

* Veracruz/ix55 3.0 CRDI

For more information about HYUNDAI engines, visit http://en.wikipedia.org/wiki/List_of_HYUNDAI_engines

Advanced EX requires the latest version of Torque Pro installed in order to function. This is *NOT* a standalone application and will *NOT* work without Torque Pro.

Plugin Installation

-------------------------

1) After purchasing the plugin on Google Play, make sure that you see the plugin listed on your Android device installed applications list.

2) Launch Torque Pro and click on the "Advanced EX" icon

3) Select the appropriate engine type and return to Torque Pro main screen

4) Go to Torque Pro "Settings"

5) Make sure that you can see the plugin listed also on Torque Pro by clicking "Settings" > "Plugins"> "Installed Plugins".

6) Scroll down to "Manage extra PIDs/Sensors"

7) Usually this screen will not display any entries, unless you have added any pre-defined or custom PIDs in the past.

8) From the menu, choose "Add predefined set"

9) If your license is validated on Google Play you should see an entry for your engine. You may see predefined sets for other engine types, so make sure you pick the right one. If you don't see anything, probably you have an installation problem or validation error on Google Play. In this case, go back and repeat the installation procedure.

10) After clicking on the entry from the previous step, you should see several entries added to the Extra PIDs/Sensors list.

Note: Some sensors will be calculated real-time based on others. Make sure that you keep all sensors to avoid calculation errors.

Adding Displays

------------------------

1) After adding the additional sensors, go to the Realtime Information/Dashboard.

2) Press the menu key and then click on "Add Display"

3) Select the appropriate display type

4) Select the appropriate sensor from the list. Sensors provided by Advanced EX begins with "[HADV]" and should be listed right after the time sensors in the top of the list.

More features/parameters will be added in further releases. If you have comments and/or suggestions please just let me know.

</br></br>

</br></br>

</br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>

</br></br></br></br></br></br></br></br></br>

advanced-ex-for-hyundai.my.aptoide.com


Смотрите также