HYUNDAI Electronics H-1549 инструкция по эксплуатации онлайн - Страница 4. Hyundai h 1549


HYUNDAI H-1549 INSTRUCTION MANUAL Pdf Download.

  • Page 1

    H-1549 RADIO WITH ALARM РАДИОПРИЕМНИК С БУДИЛЬНИКОМ Instruction manual Руководство по эксплуатации...

  • Page 2

    Instruction manual Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in future. Description Front panel Right panel 9 10 1.

  • Page 3

    Instruction manual AС operation Important safeguards • The appliance is for household use only. • Before the first connecting of the appliance • The instruction manual contains important check that voltage indicated on the rating label operating and maintenance instructions. For corresponds the mains voltage in your home.

  • Page 4

    Instruction manual temperature. The temerature indicatoin will be activated. The radio will turn off automatically on for 5 seconds, then the display returns to after the preset time period elapses. initial mode. Press and hold TEMP/ button • To cancel the sleep function, press to switch between Celsius and Fahrenheit button.

  • Page 5

    Instruction manual the sensor for 1 second; the display will show Infrared sensor the temperature. Place your hand again for 1 second; the display will show the current radio • You can perform some functions with the frequency. display of this unit by placing your hand over the infrared sensor.

  • Page 6

    Руководство по эксплуатации Уважаемый покупатель! Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и без- опасно пользоваться Вашей моделью изделия, рекомендуется тщательно изучить настоящее руководство перед включением, регулировкой и эксплуатацией изделия. Сохраняйте руководство для использования в будущем. Описание Передняя...

  • Page 7

    Руководство по эксплуатации обработке, утилизации и вторичной пере- кратковременных сбоев в сети питания. работке и, таким образом, предотвратите При длительном отсутствии питания в сети потенциальное негативное воздействие на батарея может разрядиться, что повлияет окружающую среду и здоровье людей. на точность хода часов. •...

  • Page 8

    Руководство по эксплуатации выбранная индикация будет отображаться соединения разъема для наушников или ли- на дисплее в течение 5 секунд, после чего нейного разъема внешнего аудио устройства дисплей вернется в исходное состояние. к линейному разъему данного устройства. Яркость подсветки дисплея Операции с радио Для...

  • Page 9

    Руководство по эксплуатации • Нажмите и удерживайте кнопку AL.SET. и будильник сработает вновь в установлен- Нажимайте эту кнопку для поочередного вы- ное время на следующие сутки. бора параметра будильника для настройки в • При срабатывании будильника нажмите следующем порядке: часы первого будиль- кнопку...

  • Page 10

    Руководство по эксплуатации Комплект поставки Радиоприемник с часами 1 шт Руководство по эксплуатации 1 шт Гарантийный талон 1 шт Информация для потребителя 1 шт Технические характеристики Номинальное напряжение питания 220 В, 50 Гц Номинальная потребляемая мощность 5 Вт Выходная мощность 350 мВт...

  • www.manualslib.com

    HYUNDAI Electronics H-1549 инструкция онлайн просмотр

    background image

    4

    Instruction manual

    activated. The radio will turn off automatically after the preset time period elapses.

    •  To cancel the sleep function, press   

    button.

    Alarm operation

    Setting the alarm

    •  Press and hold AL.SET button. Press 

    it repeatedly to cycle through alarm settings in following order: Alarm 1 hours => Alarm 1 minutes => Alarm 1 weekend => Alarm 2 hours => Alarm 2 minutes => Alarm 2 weekend. The selected setting will blink.

    •  Press repeatedly TEMP/

     button or 

    press and hold it to decrease the setting; press repeatedly Y-M-D/

     button or press and hold 

    it to increase the setting.

    •  In normal mode, press repeatedly AL.SET 

    button to show the alarm settings.

    •  Slide DIMMER switch to AUTO OFF 

    position. After 15 seconds the display will switch off and it will resume when the preset alarm time comes.

    Alarm signal selection

    Press repeatedly AL.1 button (for Alarm 1) 

    or AL.2 button (for Alarm 2) to select alarm sound. Press once to select buzzer (  will be on), press twice to select radio (  will be on), press thrice to disable alarm signal (no indication will be on).

    Snooze control

    •  When the alarm time comes, the signal will 

    sound for 30 minutes if no button is pressed. After that the sound will mute and start at the same time the following day.

    •  When the alarm is on, press SNOOZE/

    SLEEP button to interrupt the alarm signal. After 9 minutes the alarm will be on again.

    •  If you want to stop the alarm, press   

    button. The alarm will resume in 24 hours.

    temperature. The temerature indicatoin will be on for 5 seconds, then the display returns to initial mode. Press and hold TEMP/

     button 

    to switch between Celsius and Fahrenheit temperature modes.

    Bottom backlight

    To switch on/off the backlight of the unit 

    bottom, press LIGHT ON/OFF button.

    Line input

    •  You can connect the audio output of an 

    external device to this unit, to listen to the sound of that device through the amplifier of this unit.

    •  To connect an external audio device (eg. 

    MP3 player), please use a standard stereo cable (not included) with 3.5 mm to 3.5 mm plugs to connect the headphone out or audio line-out of the external device to the Line input socket of this unit.

    Radio operation

    Tuner operations

    •  Press   button to turn the radio on or off.•  Press BAND button to switch between AM 

    and FM radio bands.

    •  Adjust the program by rotating TUNE 

    regulator. Use VOLUME regulator to adjust volume level.

    •  To obtain better FM signal reception, 

    extend the FM wire antenna to its full length.

    •  The AM signal is picked up through the 

    built-in antenna. The unit should be placed to a position for the best reception.

    Sleep to music

    •  In Radio mode, press SNOOZE/SLEEP 

    button to turn on sleep mode. The default sleep time of 90 minutes will be set. Press this button repeatedly to select 60, 30 or 15 minutes of sleep time period. The figures will blink on the display for 5 seconds. “SLEEP” will be displayed meaning that the sleep function is 

    manualbase.ru

    HYUNDAI Electronics H-1549 инструкция онлайн просмотр

    background image

    3

    Instruction manual

    Important safeguards

     

    •  The instruction manual contains important 

    operating and maintenance instructions. For your safety, it is necessary to refer the manual. Keep the manual for use in future.

    •  Do not hit or drop the unit.•  Do not expose the unit to vibration, 

    direct sunlight, too high or low temperature or humidity.

    •  If you are not going to use the unit within 

    a long period of time, remove the batteries to avoid their leakage.

    •  Do not disassemble the unit yourselves. 

    Refer servicing to qualified service personnel.

    Power supply

     

    Battery operation

    •  Insert 1 x 3 V lithium battery CR2032 (not 

    included) to the terminal inside the battery compartment according to the polarity marks (+ and -). Your set will not work normally from the battery supply, but there is now the advantage that, in case there is a mains current failure, your clock will continue to work. The clock display will not light up, the clock time and alarm setting will be held in the clock memory by the battery back-up system.

    This enables you to move the set from place to 

    place without re-setting the clock every time. The battery back-up system is only meant to be used from short temporary power failures. For longer durations the battery may become exhausted or there may be some deviation in accuracy.

    •  When the battery is exhausted, it should 

    be removed from the set to prevent leakage. If you do not wish to take advantage of the battery back-up system, your set will work normally without a battery. However, if disconnected from the mains, the clock figures will flash when the mains are reconnected and you must re-set the clock.

    AС operation

    •  The appliance is for household use only.•  Before the first connecting of the appliance 

    check that voltage indicated on the rating label corresponds the mains voltage in your home.

    •  Insert the plug into the power supply.•  The set is now working as electronic clock.

    General operations

    Setting the clock and calendar

    •  Press and hold MODE button. Press it 

    repeatedly to cycle through time and calendar settings in following order: Year => Month => Day => 12/24H mode => Current hours => Current minutes. The selected setting will blink.

    •  Press repeatedly TEMP/

     button or 

    press and hold it to decrease the setting; press repeatedly Y-M-D/

     button or press and hold 

    it to increase the setting.

    •  In normal mode, press repeatedly Y-M-D/

     button to switch the display between 

    current time, year and month and day. Each indication will be on for 5 seconds, then the display returns to initial mode. 

    Dimmer function

    To adjust brightness of display, slide 

    DIMMER switch to HIGH or LOW position.

    Reset

    To reset all settings of the unit to default 

    settings, press the RESET hole with a pointed object (e.g., a ballpoint pen). This measure is needed when you changed the batteries in the unit or if the unit does not function correctly.

    Daylight saving time

    Press and hold Y-M-D/

     button to 

    switch on or off the DST (Daylight Saving Time) mode. This enables to observe 1-hour difference between summer and winter time.

    Thermometer

    Press TEMP/

     button to show the current 

    manualbase.ru

    HYUNDAI Electronics H-1549 инструкция онлайн просмотр

    background image

    5

    Instruction manual

    Radio operation

    Nominal voltage

    220 V, 50 Hz 

    Nominal power consumption

    5 W

    Output power

    350 mW

    Stabilizer

    Quartz

    Display

    1.2” height of symbols, LED

    FM radio frequency

    64 - 108 MHz

    AM radio frequency

    526.5 - 1629 kHz

    Net/Gross weight

    0.554 kg/0.71 kg

    Unit dimensions

    186 x 75 x 107 mm

    Specifications and functions are subject to change without notice. It is connected with continual 

    improvement of the device.

    Infrared sensor

    •  You can perform some functions with the 

    display of this unit by placing your hand over the infrared sensor.

    •  In radio off mode, place your hand over 

    the sensor for 1 second; the display will show the temperature.

    •  In radio on mode, place your hand over 

    the sensor for 2 seconds; the unit will go to sleep time setting mode.

    •  When the alarm is on, place your hand 

    over the sensor for 1 second to interrupt the signal for 9 minutes (snooze function).

    •  In radio off mode, when the display 

    dimmer switch is slid to AUTO OFF position, the display will switch off after 15 seconds. Place your hand over the sensor for 1 second; the display will switch on. 

    •  In radio on mode, place your hand over 

    the sensor for 1 second; the display will show the temperature. Place your hand again for 1 second; the display will show the current radio frequency. 

    Maintenance and care

    Switch off the appliance, unplug from the 

    power supply. The outside of the appliance can be cleaned with a slightly damp cloth.

    Accessories

    Receiver   

     

     

    1 pc

    Instruction manual   

     

    1 pc

    Warranty card 

     

     

    1 pc

    Consumer information 

     

    1 pc

    manualbase.ru


    Смотрите также