HYUNDAI H-CDM8043 инструкция по эксплуатации онлайн - Страница 23. Hyundai h cdm8043 цена


HYUNDAI H-CDM8043 инструкция онлайн просмотр

background image

6

Detachable control panel

Detaching the control panel

Turn the Power off.Press the panel release button REL.Remove the control panel.

Attaching the control panel

Insert the right side of the control panel into the main unit.

Note: the control panel must be attached into the T-Joint.

Press the control panel on to the left side of middle of

it until a “click” sound is heard.

Caution:DO NOT insert the control panel from the left side. It can damage the control panel.The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be carefulnot to drop it or subject it to strong shocks.The rear connector that connects the main unit and the control panel is an extremely important part. Be careful notto damage it by pressing on it with fingernails, pens, screwdrivers, etc.Note:If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cottonswab soaked in isopropyl alcohol to clean the socket on the back of the control panel.

manualbase.ru

HYUNDAI H-CDM8043 инструкция онлайн просмотр

background image

25

3.

During any playback press and hold it for 2 seconds

to start intro play of

 the tracks in current folder. The

display shows D-INT.

4.

Press it again to cancel the function.

Inserting the number of track

1.  Press the number buttons to input the desired tracks.2.  Use the 5 button to go backward to the tenth track before the current track, for example: current track is 32.

Press 5 to go to No.30 track.Use the 6 button to go forward to the tenth track after the current track, for example: current track is 32. Press6 to go to No. 40 track.

3.  Use the

 or

  buttons to go to the previous/ next track by one.

Search function

In MMC/ SD or USB mode, press A.P button repeatedly to select TRACK SEARCH or DIRECTORYSEARCH mode.In MP3/ WMA disc mode, press A.P button repeatedly to select TRACK SEARCH, CHARACTERSEARCH or DIRECTORY SEARCH mode.

Track searchIn TRACK SEARCH mode of MMC/ SD, USB or MP3/ WMA disc, the LCD will display MP3/ WMA T 000and flash the biggest digit 0 that the MMC/ SD card, USB bar or MP3/ WMA disc contain.1.  Rotate VOLUME knob to select the number of the flashing digit from 0 ~ 9.2.  Press SEL button to confirm the number and flash next smaller digit 0. With the same means, select the

number of the flashing digit.

3.  After finishing selecting the number of all flashing digit, press SEL button to play the track of the selected

number.

manualbase.ru

HYUNDAI H-CDM8043 инструкция онлайн просмотр

background image

3

Important safeguards

Using the device at temperature below -10º  may cause the breakage of the device. BEFORE USINGPLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDEDTEMPERATURE!Read carefully through this manual to familiarize yourself with this high-quality sound system.Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higheramperage rating may cause serious damage to the unit.DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.Make sure that pins or other foreign objects do not get inside the unit; they may cause malfunctions, or createsafety hazards such as electrical shock or laser beam exposure.If  you  have  parked  the  car  for  a  long  time  in  hot  or  cold  weather,  wait  until  the  temperature  in  the  carbecomes normal before operating the unit.DO NOT open covers and do not repair yourself. Consult the dealer or an experienced technician for help.Make sure you disconnect the power supply and aerial if you will not be using the system for a long periodor during a thunderstorm.Make sure you disconnect the power supply if the system appears to be working incorrectly, is making anunusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it. Have aqualified technician check the system.The unit is designed for negative terminal of the battery, which is connected to the vehicle metal. Pleaseconfirm it before installation.Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it mayoverload or burn out the power amplifier.Do not install the detachable panel before connecting the wire.

manualbase.ru

HYUNDAI H-CDM8043 инструкция онлайн просмотр

background image

4

Installation/ connection

Attention:REMOVE THE TRANSPORT CD STOPPER (2 SCREWS)BEFORE USE.

Din front-mount (method 1)

After inserting the holder into the dashboard, select the appropriatetab and bend them inwards to secure the holder in place.Insert fingers into the groove in the front of frame and remove it.Insert the levers supplied with the unit to the grooves at both sides.The unit can be installed or removed from the dashboard.

1. Dashboard2.  Nut (5mm)3.  Spring washer4.  Screw (5 x 25mm)5. Screw6. Strap7.  Plain washer

Removing the unit

Insert fingers into the groove in the front of frame and pull out to remove the frame.

(When reattaching the frame, point the side with a groove down wards and attach it.)

Insert the levers supplied with the unit into the grooves at both sides of theunit as shown in figure until they click. Pulling the levers makes it possibleto remove the unit from the dashboard.

frame

lever

manualbase.ru

HYUNDAI H-CDM8043 инструкция онлайн просмотр

background image

23

Note:USB format supports 2.0.Capacity: 8 MB ~ 512 MB.SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.Capacity: 8 MB ~ 512 MB.MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.Capacity: 16 MB ~ 512 MB.

Playing/ pausing

When the disc/ card/ USB device has been already loaded the playback of the first track starts automatically.To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.Press the PLAY/ PAUSE button to pause the playback. Press again to resume the playback.Press it and hold for more than 1 second to play the first track of the CD/ SD/ MMC/ USB.

Playing the previous/ next track

1.  During playback press

  button to play the current track from the beginning. Press it again to play the

previous track.

2. Press

  button to play the next track.

3.  Press the 5, 6 buttons to play the 10 track up/ down.

Scanning forward and backward

Press the

or

  buttons to fast the playing in backward or forward direction.

Note: During the disc playback when Fast/ Reverse Playback gets to the beginning of the playing another track,it resumes normal playback.

manualbase.ru


Смотрите также